Customization: | Available |
---|---|
Container Size: | Support |
Weight: | Customization |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Dawnice 50-250kw Commercial Energy Storage System | |||
Model | DWESS-100-50 | DWESS-200-100 | DWESS-400-250 |
PV Parameters | |||
MPPT voltage range | DC250V ~DC850V | ||
MPPT full power Volt range | DC450V ~DC850V | ||
MPPT channel Qty | 1-3(Optional) | ||
AC grid connected parameters | |||
Rated power (kW) | 50 | 100 | 250 |
Rated current (A) | 55 | 110 | 275 |
Rated voltage (V) | AC 380/400/480V | ||
AC connection | 3W+N+PE | ||
Rated frequency (Hz) | 50/60 | ||
THDi | <3%(Rated power) | ||
AC off-grid parameters | |||
Rated power (kW) | 50 | 100 | 250 |
Rated current (A) | 55 | 110 | 275 |
Rated voltage (V) | 3W+N+PE, 380 | ||
THDu | <1%(Linear Load) | ||
Rated frequency(Hz) | 50/60 | ||
Overload capacity | 110%] long-term | ||
Battery Parameter | |||
Cell type | LFP | ||
Module power (kWh) | 14.336 | ||
Module Qty | 7 | 14 | 28 |
System rated power (kWh) | 100.352 | 200.7 | 401.4 |
Running Time (h) | 2 (Optional by Changing module qty) | ||
Life cycle | 25ºC0.5C/0.5C 100%DOD EOL80% ≥ 6000 | ||
System Efficiency | |||
Maximum efficiency | 95% | ||
Protection | |||
DC switch&AC switch | YES | ||
Grid monitoring | YES | ||
Insulation monitoring | YES | ||
DCEN protection | YES | ||
Earth-fault protection | YES | ||
Surge protection | DC II/AC II | ||
Basic Parameters | |||
Dimension W*D*H (mm) | 1800*1200*2250 | 2600*1200*2250 | 4000*1200*2250 |
Weight (kg) | 2067 | 3346 | 6728 |
Protection | IP54 | ||
Working temperature | -20 ~55ºC(>45ºCderating) | ||
Relative humidity(No condensation) | 0 ~95% | ||
Cooling | Air cooling, intelligent fan regulation | ||
On and off grid switching device | STS | ||
Working altitude (m) | 4000(>2000 derating) | ||
Data display | Touch screen | ||
Communication Interface | RS485,CAN | ||
Protocol | Modbus-RTU,CAN2.0B |
To be a World-Class Energy Services Provider
1. Free-installation
This product is designed from the perspective of reducing customer site work, and the overall weight of the container is designed below the maximum allowable transport weight, so it can be transported as a whole without removing the module 50% faster installation and Reduced 30% CapEx for on-site installation 15% energy density increase